Regarding the installation of non-metallic cable trays
Discussion on the Practical Significance of Laying Flat Steel for Unified Grounding
It is unclear what the true meaning of this design specification is; perhaps we have not fully grasped its actual significance.
In our understanding, there are likely two purposes:
1. Safety Considerations: In the event of a cable leakage, the flat steel installed within the cable tray can conduct and ground the current, ensuring that no high voltage is generated throughout the tray and thus guaranteeing safety. However, this measure is considered unnecessary: non-metallic cable trays are inherently insulating and will not transfer the voltage from the leakage point to the tray; therefore, the use of flat steel for current conduction and drainage is redundant. Moreover, the likelihood of the leakage point coinciding with the location of the flat steel is extremely low, rendering its conductive function ineffective. Consequently, installing flat steel offers no practical safety benefit.
2. Non-metallic cable trays are prone to generating static electricity (non-antistatic cable trays). The flat steel bars installed within the tray dissipate the static electricity generated on its surface, preventing static sparks and providing explosion-proof safety for areas with such requirements. However, this approach is considered ineffective: the static potential generated by solids reaches kilovolt levels, while the creepage distance across an insulator at this voltage level ranges from 1 to several tens of millimeters (creepage distance: 1 mm per 1 kV). From the perspective of the tray cross-section, the flat steel bars can only discharge static electricity within a few tens of millimeters around them; static electricity beyond this distance cannot be eliminated. Therefore, installing flat steel bars for static dissipation has no practical significance.
The above analysis demonstrates that installing flat steel conductors when laying non-metallic cable trays is of no practical significance for achieving the aforementioned two objectives.
Unless for another purpose.
Due to our limited academic expertise and insufficient knowledge, the above analysis is merely superficial and intended for reference only. We welcome any criticism or suggestions for improvement.
