Analysis and Discussion on the Fact That Composite Anti-Corrosion Cable trays Do Not Require Cross-Connecting Wires

1. Function of the Bridge Wire
The bridge trunking crossover cable is used at the connection point between two sections of bridge trunking and ultimately connects each section to ground. This cable is employed in bridge trunking systems.
It serves as a conductive potential for auxiliary interconnection between sections, does not carry current under normal conditions, and provides leakage protection.
To prevent electric leakage, ensure that the cable tray is not connected to other trays, as this could lead to leakage and pose personal hazards.


2. Cross-connectors are primarily used in the installation of metal cable trays.
Metals contain a large number of free electrons, and the directed movement of these electrons generates an electric current; therefore, metals are conductive. To ensure the purity of gold...
Ensure effective connectivity between each section of the cable tray to reduce resistance; use crossover wires at all connection points, and promptly establish crossover connections in case of leakage current.
Form a cohesive unit to direct the current into the ground, preventing leakage accidents.


3. Composite anti-corrosion cable and cable tray do not require cross-connect wiring connections
The composite corrosion-resistant cable tray consists of an internal metal skeleton and an external non-metallic polymer anti-corrosion layer.
The material contains no freely moving electrons, and non-metallic polymer materials are non-conductive. Although composite anti-corrosion cable trays contain metal internally...
Such materials do exist; however, non-metallic polymer materials completely encapsulate the metal within them, and there are no metal gaps at the joints of each cable tray section.
Conductive leakage current may occur, but there is no risk of electric shock; therefore, bridging connections are unnecessary between each section of the cable tray.
 

 

Send Inquiry